High Temperature Silicone 600 Deg. F.


  • High Temperature Silicone Sealant For Any Application That Requires A Permanently Flexible Waterproof Seal That Will Withstand Moisture, Heat And Vibration
  • Adheres To Clean Metal, Glass, Most Types Of Wood, Ceramic, Plastic, Brick And Slate
  • Fully Cured, It Can Be Used For Extended Periods At Temperatures Up To 260 Deg C And For Shorter Periods As High As 316 Deg C
  • Surfaces Must Be Clean And Dry
  • Cut Nozzle For Desired Bead Size At A 45 Deg Angle
  • Using A Caulking Gun, Apply By Pushing Sealant Ahead Of Nozzle. Tool Sealant Immediately After Application
  • Sealant Can Be Applied In Temperatures As Low As -65 Deg C Provided The Surfaces Are Dry And Frost Free
  • Can Be Applied Overhead Or On Sidewall Joints And Surfaces Without Sagging, Slumping Or Running Off




Type: Flexible, High Temperature, Waterproof
Packing Type: Cartridge
V O C Content: 32 G/L
Form: Paste
Standards: MIL-A-46106A, Amendment 2, Type 1, Certified By NSF Agriculture Canada Approved
Drying Time: 24 Hr
Application Time: 30 Min
Odor/ Scent: Acetic Acid/Thixotropic Sealant
Composition: Amorphous Silica, Methyl Triacetoxysilane, Ethyl Triacetoxysilane, Octamethylcyclotetrasiloxane
Media: Carbon Dioxide, Dry Chemical, Water Fog/Foam
Flammability Rating: 1
Specific Gravity: 1.04
Application Temperature: -65 Deg C
Application Method: Caulking Gun
Applicable Materials: Metal, Glass, Wood, Ceramic, Plastic, Brick And Slate
Temperature Range: 260 Deg C